Getting Started; Turning The Power On; Setting On The Car Audio Unit - Sony RM-X7BT Bedienungsanleitung

Installing the adaptor
1
Attach the adaptor to the
installation site using the
supplied double-sided tape
.
2
Connect the AUX cable and
USB cable.
Note
Before attaching the tape, clean
each installation site of the adaptor
and remote commander with a dry
cloth.



Getting Started

Turning the Power on

1
Turn the ignition on or set the
ignition to ACC.
The adaptor turns on.
To turn the power off
Turn the ignition off.
The adaptor turns off.
Note
If your car's ignition has no ACC
position, remove the USB cable each
time you turn the ignition off to
prevent battery drain.
Setting on the Car
Audio Unit
1
Switch the source on the car
audio unit to the AUX source.
When connecting the adaptor
to the car audio unit, the
sound of the device connected
to the adaptor is output from
the speaker on the car audio
unit.
9
GB