Sony RM-X7BT Bedienungsanleitung Seite 11

Notes
 When making the connection,
handle the smartphone carefully to
prevent scratches.
 One touch connection is not
possible when the adaptor is
already connected to another NFC
compatible device. In this case,
disconnect the other device, and
make connection with the
smartphone again.
Pairing and connecting
with a BLUETOOTH device
When connecting a BLUETOOTH
device for the first time, mutual
registration (called "pairing") is
required. Pairing enables this
adaptor and other devices to
recognize each other.
1
Place the BLUETOOTH device
within 1 m (3 ft) of this
adaptor.
2
Press and hold PAIRING for 2
seconds.
flashes quickly while the
adaptor is in pairing standby
mode.
3
Perform pairing on the
BLUETOOTH device so it
detects this adaptor.
4
Select [RM-X7BT] (your model
name) shown in the display of
the BLUETOOTH device.
If your model name does not
appear, repeat from step 2.
5
If passkey input is required on
the BLUETOOTH device, input
[0000].
When pairing is made,
flashes.
6
Select this adaptor on the
BLUETOOTH device to
establish the BLUETOOTH
connection.
lights up when the
connection is made.
Notes
 While connecting to a BLUETOOTH
device, this adaptor cannot be
detected from another device. To
enable detection, enter the pairing
mode and search for this adaptor
from another device.
 Depending on the status of the
BLUETOOTH device, it may not be
possible to obtain your model
name.
To start playback
For details, see "Playing a
BLUETOOTH Device" (page 12).
To cancel pairing
Perform step 2 to cancel the
pairing mode after this adaptor
and the BLUETOOTH device are
paired.
11
GB