PCE Instruments PCE-TG 300 Bedienungsanleitung Seite 31

System Reset
5.4.5
Press F3 Setup to enter the main menu. Navigate to the function „System Reset". Confirm the
reset b ypressing F 3
Note: When you reset the meter, all settings, calibrations
5.4.6 Printing via Bluetooth
How to set up a Bluetooth
1. Turn on the portable Bluetooth printer.
2. Select Master mode as Bluetooth mode (4.2.2) for the
meter.
3. You will be asked if you wish to search for Bluetooth
printers nearby. Select "Yes" if you are setting up the
printer for the first time. Otherwise, select „No".
The meter will try to establish a Bluetooth connection with the printer. Wait for a few seconds. When
the Bluetooth status LED glows continuously,
Note: When the meter
automatically to save power.
Print
In the Memory Manager, the saved data sets can be printed
by using the portable Bluetooth printer. Choose „Print" to print
the selected data set. You can also print all saved data sets
via „Print All".
You can also print the current measured value directly via Fl
after each measurement.
orexitbypressing Fl O.
(only possible
connection with the printer
this means that the meter is connected to the printer.
is switched off and back
O PCE Instruments
and readings will be deleted completely.
with the optional Bluetooth
Bluetooth
Slave
Master
ote
•Mastermode"Contr01 a mingpnnterto printreport.
Stan up the mtneprinter to budd up the connection
on, the Bluetooth
Memory
*FOO
F02
F03
F 04
F05
€1
P5EE
FOO•.02
PRINT
28
printer)
Configure
Mode
Mode
function will be disabled
Manager
2/100
0/100
0/100
oo
Clear
00
Clear All
00
print
Print All
v=5865
16:04
PROBE SETUP