Werbung
Verfügbare Sprachen
Verfügbare Sprachen
• Warning 11 indicates that the battery might be at fault or have been over discharged. This
fault code will be shown every 10 seconds.
• Warning 12 will occur if the battery has been disconnected from the charger, without the
pause button being pressed.
1.7
Repair
This product is not user serviceable. To prevent electric shock, the case must not be
removed.
In the event of a problem occurring please contact your local Service Department.
1.8
Maintenance
Before carrying out maintenance, isolate the mains supply and disconnect the bat-
tery.
Only suitably qualified personnel should perform maintenance work on this
equipment.
The charger will require little maintenance, but the following schedule is recommended once
a month:
(a)
Check the condition of all cables, paying particular attention to the points where cables
may be severely flexed, i.e. at the entry to charger cabinet, charging plugs and sockets.
(b)
Check condition of charging plugs and sockets for wear and any evidence of overhea-
ting, which could ultimately
lead to charger malfunction.
(c)
Check that ventilation is not obstructed.
(d)
Ensure that all safety covers and panels are correctly in place.
Exide Technologies recommends that a yearly periodic inspection / test is performed on this
equipment, contact your local agent for details.
1.9
Guarantee
See local conditions of sale.
7/87
English
Werbung
