Silvercrest STSK E1 B2 Bedienungs- Und Sicherheitshinweise Seite 61

NOTE: If the headphones have already been paired
to each other, the secondary headphone is already
connected to the primary headphone and flashes white
only. A signal sounds once the headphones are paired to
each other.
On your Bluetooth playback device, search for a product
named STSK E1 B2 and pair with the product. If your
Bluetooth device prompts you to enter a password, enter
0000. A signal sounds once the headphones are paired
to each other.
A signal sounds once the headphones are successfully
paired to the Bluetooth device.
˜ Reset
To reset the headphones, follow below steps:
Disconnect the left and the right headphone
playback device:
− Putting headphones back to charging box
− Remove one of the headphones (left or right) from the
charging/storage box
Briefly press the MFB button
succession until the LED
Insert the previously removed headphone back into
the charging/storage box
.
7 ] [
3 times in quick
3 ] [
briefly flashes red/white.
6 ] [
to complete the reset.
7 ] [
from a
1 ] [
GB/IE 57