Herunterladen Diese Seite drucken

cecotec FAST&FURIOUS 5020 FORCE Bedienungsanleitung Seite 9

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 41
Unplug the appliance immediately if fire or smoke is
observed.
Do not leave the product unsupervised during operation.
Unplug the device after use and when you leave the room
where it is installed.
The appliance must not be plugged in when filling or emptying
the water tank.
The tank cap must not be open when the appliance is switched
on.
The use of tap water is recommended. If the lime content of the
tap water is too high, use a mix composed of 50 % of tap water
and 50 % of water with low mineral content. Do not use only
water with low mineral content.
Burns can occur when touching hot metal parts, hot water, or
steam. Hot water may leak from the iron.
Be careful when filling or turning the steam iron upside down.
To protect against burns or injuries, do not direct steam toward
persons or animals when ironing.
The iron must be used and placed on a stable surface. When
placing the iron on its stand, make sure that the surface is
stable.
Keeping the iron at maximum temperature for too long may
cause discolouration, which will not affect the performance of
the appliance.
Do not try to repair the device by yourself. Contact the official
Technical Support Service of Cecotec for advice.
Cleaning and maintenance must be carried out according to
this instruction manual to make sure the appliance functions
properly. Turn off and unplug the appliance before moving and
cleaning it. Make sure the iron has completely cooled down
before storing it.
Cleaning and maintenance tasks must not be carried out by
FAST&FURIOUS 5020 FORCE
9

Werbung

loading

Diese Anleitung auch für:

05522