Werbung
Verfügbare Sprachen
Verfügbare Sprachen
No.
Malfunction
DEEBOT is not charging.
DEEBOT
cannot
return
to the
2
Docking Station.
DEEBOT gets Stuck while
3
working and Stops.
DEEBOT returns to the Docking
4
Station
before
it has
finished
cleaning.
Possible
Causes
DEEBOT
is not switched
ON.
DEEBOT has not connected to the Docking
Station.
The battery is completely discharged
The Docking Station is not correctly placed.
DEEBOT is tangled with something on the floor
(electrical wires, curtains, carpet fringing, etc.).
When the battery gets low, DEEBOT
automatically switches to Return to Charger
Mode and returns to the Docking Station to
recharge itself.
Working time varies according to floor
surface, room complexity and the Cleaning
Mode
selected.
5. Troubleshooting
Solutions
Switch
ON
DEEBOT.
Be sure that the robot's Charging Contacts have
connected to the Docking Station Pins.
Re-activate
the battery.
Switch ON. Place DEEBOT on
the Docking Station by hand, remove after charging for 3
minutes, repeat 3 times; then charge normally.
Refer to Section 3.2 to correctly place the Docking Station.
DEEBOT will try various ways to free itself.
unsuccessful, manually remove the obétacles and restart.
This is normal. No solution necessary.
This is normal. No solution necessary.
If it is
23
EN
Werbung
