Checking The Charge Status Of The Battery; Working With The Leaf Blower; Connecting The Device To The Parkside App - Parkside Performance Pptlba 40-Li B2 Originalbetriebsanleitung

Checking the charge status
of the battery
The charge level indicator (8) shows the
state of charge of the battery (2) as long
as the device is turned on via the On/off
switch (10) on the control panel.
The charge level of the battery is indicated
by illumination of the corresponding LED
lights.
3 LEDs illuminated (red, orange and
green): Battery charged
2 LEDs illuminated (red and orange):
Battery partially charged
1 LED illuminated (red):
Battery needs to be charged
Working with the leaf
blower
The leaf blower may only be
used for the following pur-
poses:
- As a blower to pile up dry
leaf material or to blow ma-
terial out of places that are
hard to access (e.g. under
cars).
During work, ensure that the device
is not struck against hard objects,
which can cause damage.
Blowing operating mode:
• You get optimal results when you use
the blower with a separation distance
to the ground of 5 -10 cm.
• Begin work with the highest blowing
power, in order to rapidly pile up the
leaves lying around. Select a lower
blowing power to compact the previ-
ously piled up leaves.
• Before blowing, loosen leaves adher-
ing to the ground with a broom or
rake.
• The guide rollers at the end of the tube
make it easier to work on flat surfaces.
• Hold the device by the handle (1) when
working.
• Working with the blower
pipe and attachment/flat nozzle:
With the blower pipe and attachment,
you can collect leaves over a wider
area.
The flat nozzle functions as a turbo
nozzle, which can be used to reach the
highest air speed.
Connecting the device
to the Parkside app
Only Smart Performance batteries
can be connected to the Parkside
app. The device connects to the app via
the battery.
1. Place Smart Performance batteries (2) in
the device. You will hear them click into
place.
2. Press the on/off switch (10)
The device is now activated and the
Smart LED
3. Enable Bluetooth
4. Open the Parkside app.
5. Select .
If you have already connected
the Smart Performance battery
you are using the device with to the
app, you will find the device in the list
of connected devices.
6. Select the device from the list.
GB
(11) flashes briefly.
on your smartphone.
®
MT
37