Technical Data; Charging Time - Parkside Performance Pptlba 40-Li B2 Originalbetriebsanleitung

Technical data

Cordless Turbine
Leaf Blower .......... PPTLBA 40-Li B2
Nominal voltage U 40 V
Type of battery ................................ Li-ion
Current strength
I ................................................. 16 A
1
I ................................................. 25 A
2
Rated power ......................max. 1000 W
Rated speed n ...........9000 - 23000 min
Air speed ........................max. 250 km/h
Protection type................................. IPX0
Weight (without battery) .............. 2.78 kg
Sound pressure level
(L ) ........................ 74.1 dB, K
pA
Sound power level (L
guaranteed ................................ 96 dB
measured ...............94.47 dB; K = 2 dB
) .......≤ 2.5 m/s
Vibration (a
h
or use with smart batteries
(Smart PAPS 204 A1/Smart PAPS 208 A1)
Operating frequency/Frequency band ......
2400 - 2483.5 MHz
Max. transmission power .......... ≤ 20 dBm
Temperature
for device + battery ................max. 50 °C
Charging ..............................4 - 40 °C
Operation ........................... -20 - 50°C
Storage ..................................0 - 45°C
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration of
conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another. The
stated vibration emission value may also
be used for a preliminary exposure assess-
ment.
(DC) (2x 20 V)
= 3 dB
pA
)
WA
2 ; K= 1.5 m/s
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
-1
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched
off and times when it is switched on
but running without any load).

Charging time

The device is part of the Parkside X 20 V
2
TEAM series and can be operated with
batteries of the Parkside X 20 V TEAM
series.
Batteries of the Parkside X 20 V TEAM
series may only be charged using chargers
of the Parkside X 20 V TEAM series.
We recommend that you operate
this appliance with the following
batteries only: PAP 20 B1, PAP 20 B3 ,
Smart PAPS 204 A1, Smart 208 A1.
We recommend charging these batteries
with the following chargers: PLG 20 A3,
PLG 20 A4, PLG 20 C3, PLG 20 C1,
PLG 20 C2, PLG 201 A1, PDSLG 20 A1,
PDSLG 20 B1, Smart PLGS 2012 A1.
GB MT
27