Residual Risk; Initial Start-Up; Charging The Battery - Parkside Performance Pptlba 40-Li B2 Originalbetriebsanleitung

GB MT
• Do not expose the device or bat-
tery to excessive temperatures.
• Be aware of the risk of short-cir-
cuiting the poles of the battery-
powered device or battery by
metal objects.
• Rechargeable batteries must be
removed from the device before
charging.
• Do not mix different types of
batteries or new and used bat-
teries.
• Used batteries must be removed
from the device and disposed of
safely.
• If the device is to be stored un-
used for a long period of time,
the batteries must be removed.
• Do not use non-rechargeable
batteries instead of recharge-
able batteries.
• Do not use modified or dam-
aged batteries.
• WARNING: Only use with
PLG 20 A3, PLG 20 A4,
PLG 20 C3, PLG 20 C1,
PLG 20 C2, PLG 201 A1, PD-
SLG 20 A1, PDSLG 20 B1,
Smart PLGS 2012 A1 battery
charger.

RESIDUAL RISK

Even if properly operating and
handling this electric tool, some
residual risks will remain. Due to its
construction and build, this electric
tool may present the following haz-
ards:
a) Ear damage if working without
ear protection.
b) Damage to your health caused
by swinging your hands and
arms when operating the appli-
34
ance for longer periods of time
or if the unit is not held or main-
tained properly.
c) Lung damage, if suitable respira-
tory protection is not worn.
d) Eye injuries if no suitable eye
protection is worn.
Warning! During operation,
this electric tool generates an
electromagnetic field which,
under certain circumstances,
may impair the functionality
of active or passive medical
implants. In order to reduce
the danger of serious or fatal
injuries, users who wear medi-
cal implants must consult their
doctor and the manufacturer
of the implant before operat-
ing the machine.

Initial start-up

Before operating the device, you must
- insert both rechargeable batteries,
- Mount both pipes.
Caution! Risk of injury!
During assembly or disassembly
of the pipes (blower pipe, attach-
ment, flat nozzle), the device must
be turned off and all moving parts
must have come to a standstill. Re-
move the batteries before carrying
out any work!

Charging the battery

Make sure that the recom-
mended ambient tempera-
ture is observed during
charging. You will find this
in the instruction manual for