Supplied Components; Preparing The Remote Control Unit - Sharp Multisync Pn-M552 Installationsanweisung

If any components are missing, please contact your dealer.
 LCD monitor: 1
 Remote control unit: 1
 Cable clamp: 1
 Screw (M4): 1
* : Depending on the country where the LCD monitor is shipped to, AAA batteries are not included in
1
the box contents.
Please note: do not dispose of batteries in household waste for environmental protection.
Follow the disposal instructions for your area.

TIP: Please refer to Option Board Installation Manual for the procedure for installing the
slot cover.

Preparing the Remote Control Unit

The remote control unit is powered by two 1.5 V AAA batteries.
To install or replace batteries:
1

NOTE: • If you do not intend to use the remote control unit for a long period of time,
remove the batteries.

• Use manganese or alkaline batteries only.

Supplied Components

 Power cord
 Remote control unit battery*
 HDMI cable: 1
 Slot cover: 1 set
2
: 2
1
3
13
E