Turning Power On/Off; Turning On The Main Power - Sharp Multisync Pn-M552 Installationsanweisung

TIP: • Do not connect or disconnect cables when turning on the monitor's main power
or other external equipment's power as this may result in loss of image.

• Do not use an attenuating (built-in resistor) audio cable. Using an audio cable
with a built-in resistor will lower the sound level.

NOTE: • Use only the power cord supplied with the monitor.

• When connecting the power cord to the product's AC input terminal, make sure
the connector is fully and firmly inserted.

Turning on the main power

Make sure that the main power switch is turned on (|).

Turning Power On/Off

Main Power Switch
OFF ON
15
E