Flashforge Adventurer 5M Bedienungsanleitung Seite 52

Slicing Software Instructions for Adventurer 5M Series
Before reading the brief instructions, please ensure you have reviewed the Quick
Note
Start Guide and completed the first print.
Before printing 3D model files, you need to configure slicing presets for the corresponding printer.
Recommended slicing software: Orca-Flashforge / OrcaSlicer.
Pre-printing Steps:
01
Obtain the 3D file
(STEP/STL/OBJ)
Orca-Flashforge is a slicing software developed based on OrcaSlicer, with custom features
Download Instructions:
1. Download the latest slicing software from: https://www.flashforge.com/download-center.
2. Find the Orca-Flashforge's installation package on the USB flash drive and install the version
that matches your system.
02
Download and
install the slicing
software
Orca-Flashforge
* The steps are illustrated for one machine type.
tailored for the Adventurer 5M series.
03
Use the slicing software
to convert the file into
the machine-readable
format
18
04
Import the sliced file via
a USB flash drive or
network transfer to the
printer for printing