Transport; Replacement Parts/Accessories; Storage; Disposal - Parkside Pert 550 C6 Bedienungsanleitung Und Originalbetriebsanleitung

1. Unplug the mains plug.
2. pen the spool cap
simultaneously pressing both
releases on the spool cap.
[ ]
3. Remove the cover of the spool
cap and take out the line
[ ]
spool .
[ ]
4. Press the line ends of the new spool
out of the slots
5. Insert the new line spool into the
spool cap . The side of the spool
[ ]
on which the winding direction of the
spool is indicated by arrows must be
visible after insertion.
6. Insert both ends of the line through
the opposite line outlet loops
7. Put the cover back on the spool
cap . Make sure that the
[ ]
releases on the cover t precisely
[ ]
into the recesses on the spool cap.
You will hear the releases snap into
place.
8. Pull on the line ends and press the
lock button
[ ]
line ends protrude appro cm
beyond the line cutter
˜ Transport
arry the s itched o product ith
o
one hand at the upper handle
and the other hand at the auxiliary
handle .
[ ]
Face the cutting unit towards the
o
ground. This prevents any contact
with the cutting unit during transport.
˜ Replacement parts/
Accessories
Compatible replacement parts for
this product can be purchased at
www.Optimex-Shop.com. Have the
order number ready for your order.
Orders can only be placed and
processed online. If you are not sure
where you can purchase compatible
parts, contact our customer service.
40 GB/IE
by
[ ]
.
[ ]
.
[ ]
repeatedly until the
.
[ ]
1 ] [
Position Description Order number
Line spool
[ ]
Spacer
bracket
[ ]
o er
protection)
Nut
(handwheel
bolt ‒
auxiliary
handle) &
&
[ ] [ ]
Auxiliary
&
[ ]
handle &
Handwheel
bolt
(auxiliary
handle)
Protective
9 ] [
cover
˜ Storage
Store the product in a dry place well
o
out of reach of children.
Do not stand the product on its
o
protective cover
product by its upper handle
such a manner that the protective
cover does not come into contact
with other objects. This is because
the protective cover could become
deformed, thereby changing its
dimensions and its safety properties.
˜ Disposal
The packaging is made entirely of
recyclable materials, which you may
dispose of at local recycling facilities.
Observe the marking of the
packaging materials for waste
separation, which are marked
with abbreviations (a) and
numbers (b) with following
meaning: 1–7: plastics/20–22:
paper and breboard 8
composite materials.
947187601
947187602
947187603
947187604
. Suspend the
9 ] [
in
1 ] [
8