Create Thera Move Bedienungsanleitung Seite 7

1. Tank cap
2. Water tank
3. Battery indicator
4. Temperature indicator
5. N Tank
6. Coffee cup
7. Degree indicator
celsius or Fahrenheit
8. Boil button
9. Direct preparation button
10. G Tank
Before using the device for the first time, charge the battery to its
•
full capacity.
Use the USB-TYPE C charging cable to connect the machine and the
•
adapter to charge the machine until the battery is fully charged be-
fore first use. The maximum charge is approximately 3 hours.
Press the boil button once to check the battery level.
•
A fully charged battery can prepare 3 to 4 cups of espresso or 200
•
cups of espresso by pressing for 3 seconds in direct brew mode.
Important: The charging cable is only for charging the appliance,
•
when using the machine, disconnect the charging cable.
The output adapter must be 5V 2A or higher, below this specification
•
will cause the machine charging abnormally.
This product does not include an adapter.
•
Wash only the glass and the appliance containers.
•
The machine has an internal self-cleaning function: Fill with water and
•
press the direct brew button for 3 seconds without a capsule or coffee.
Do not wash the main body of the machine.
•
Do not immerse the machine in any liquid. This will cause the ma-
•
chine to malfunction.
When the machine is in use or has the self-cleaning function, do not
•
turn it upside down.
When using the boil button function, the machine uses the NTC sen-
•
sor to control the water temperature at 92ºC (198ºF), the coffee tem-
perature ranges from 75ºC-80ºC (167ºF-176ºF).
PARTS LIST
1
2
3
4
5
6
BEFORE FIRST USE
7
8
9
10
E NGL I SH 7