Create Thera Move Bedienungsanleitung Seite 6

• Never place the battery on a flame or ignition source.
• Never disassemble, repair or modify this appliance. If the device is
defective, please contact customer service for repair.
• The appliance must not be immersed in water or splashed with water.
• In case of an anomaly or breakdown, stop the appliance immediately
and unplug it from the power outlet.
• Cases of anomalies and breakdowns:
• The power cord or plug is deformed, discolored, or damaged.
• A part of the cable or plug becomes hot.
• If the power cord is in motion, the appliance will turn on and off in-
termittently.
• The body of the appliance becomes abnormally hot or emits a bur-
ning smell.
• The body of the application makes an abnormal noise during operation.
• For maintenance and repair of the appliance, please contact the
company's after-sales department.
• Never open the water tank lid during or immediately after heating be-
fore the water is drained.
• Never touch the hot water, PTC or any other high temperature area
during or immediately after using the appliance.
• Do not touch the piercing blade while using the appliance or when
cleaning the inside of the tank, as this may cause injury to your
fingers.
• The appliance should be cleaned after it has cooled down.
• Wash the tank, its lid and the bowl, and dry them before and after
using the appliance. Coffee residue, if present, can cause an odd tas-
te and food spoilage.
• The body of the appliance can be cleaned with a damp cloth.
• During use, use clean drinking water for heating and pumping, as the
presence of particles or residue in the water can cause limescale de-
posits in the appliance or damage the water pump.
• If the appliance falls to the floor, unplug the power cord. In case of
breakdown, please contact our after-sales department.
• Never use the appliance without water, there is a potential risk of
failure.
6 E N GL I SH