Refco GOBI II Kurzanleitung Seite 4

Installation
Connect the power cable and alarm cable to the condensate
4
pump.
Attach the star tube to the pump and secure with a cable tie.
5
Stow the electrical cable and the star tube in the cable duct of
6
the air conditioning unit.
7
Attach the condensate pump and the tray to the wall back plate.
Ensure that the elevation of the pump runs correctly in the
8
guide of the wall back plate.
Make sure that the star tube is not kinked off at on edge
or similar.
8
4
5
7
6