Herunterladen Diese Seite drucken

Refco Gobi II Montageanleitung

Vorschau ausblenden Andere Handbücher für Gobi II:

Diese Anleitung herunterladen

Universal Condensate Pump

Gobi II

x 1

PH#2

x 1

x 3

x 1 (1m)

x 1

x 3

View installation video at www.condensate-pumps.com

5.5mm

7/32"

x 1

x 1 (1.5m)

Seite 1 Universal Condensate Pump Gobi II 5.5mm 7/32“ PH#2 x 1 (1.5m) x 1 (1m) x 1 (1.5m) View installation video at www.condensate-pumps.com...
Seite 2 medium low medium high high up to 18K Btu/h up to 42K Btu/h up to 72K Btu/h up to 120K Btu/h (5.3kW) (12kW) (21.1kW) (35kW) 1/4˝ (6mm) Field Supplied to drain Examples are for reference only. www.condensate-pumps.com...
Seite 3 To change Alarm Relay Operation: When Indoor Evaporator Unit is powered from the Outdoor Condenser Unit 1. Unplug pump 2. Move DIP switch positions to 3. Plug pump in Evaporator Unit (Indoor) 4. Wait for one green LED blink 5. Move DIP switch positions to Condenser Unit (Outdoor) 6.
Seite 4 PH#2 www.condensate-pumps.com...
Seite 5 View installation video at www.condensate-pumps.com...
Seite 6 LED Check Change fuse Change filter www.condensate-pumps.com...
Seite 7 Pump is miswired or no incoming voltage. Alarm fuse has been burned. Problem with A/C system No Power (off) (off) (off) (off) (off) or alarm is miswired. Power up LED sequence Alternating red/ green flashes 5x only then stop and go to standby (default relay operation). 1 sec Red/Green (off) 1 sec Red/Green...
Seite 8 REFCO ® REFCO is a registered trademark in various countries. Patent Pending. © Copyright 2016 by REFCO Manufacturing Ltd. Switzerland – all rights reserved. More information: visit www.refco.ch...