DeFelsko PosiTector SPG Gebrauchsanweisung Seite 11

method (internet connection required). Alternatively, select
Auto Sync .net from within the USB connect menu to
automatically synchroniz e upon connection to a PC. Additional
measurements added to memory while connected are
synchronized only when the USB cable is disconnected and
reconnected, or when the Sync.net Now option is selected.
WiFi connected gages automatically attempt synchronization
upon power-up.
NOTE:
Bluetooth
Allows communication with a smart device running the
PosiTector App (pg. 7) via auto-pairing Bluetooth (BLE)
wireless technology.
Sync Batches
Select batches to flag them for synchronization to the
PosiTector App. Sync Batches is useful when connecting a
new device to a gage with pre-existing batches, since only
batches created while Bluetooth is enabled are automatically
selected.
Selected batches are synchronized when the next reading is
taken in a batch flagged for synchronization, or when the Sync
Batches option is selected at the bottom of the list of selected
batches.
If Bluetooth is disabled or disconnected, data from
batches selected in the Sync Batches menu are held in a
queue until communication with the PosiTector App is re-
established.
Send Batches
Transfers selected batches to the PosiTector App. Send
Batches is useful when switching between devices, as only
readings and batches that have yet to be synchronized with any
smart device are synchronized automatically.
The Send Batches option is visible in the menu when the Gage
is connected to a smart device running the PosiTector App.
(Advanced models only)
9