Herunterladen Diese Seite drucken

eSmart EXPERT XTS Gebrauchsanleitung Seite 25

Werbung

screen due to adjustment of these screws is
not covered by the manufacturer's guaran-
tee.
Connection possibilities
Infrared
The screen has an infrared receiver that al-
lows to connect any universal infrared re-
mote control (for example Logitech Har-
mony*, etc.).
*Logitech Harmony is a brand of Logitech
International S.A.
Wireless
The screen has a 433 MHz wireless radio
reiceiver that allows to connect a wireless
trigger (not included) if desired.
Connection of several remote controls
You have the possibility to connect up to 20
remote controls to the wall panel. To
Troubleshooting
Question / Problem
The screen does not
extend / retract any-
more.
The screen is emitting
an odour.
The screen is wavy.
_____________________
Solution
Disconnect the screen from the power supply and wait for a while
until using it again.
Please extend the screen completely for a few days before first use,
to allow any odours from the production process to evaporate from
the screen material. Low room temperatures and lack of ventilation
will lengthen this process.
Unfortunately, a slight rippling of the screen due to its being rolled
up cannot be entirely avoided. The only screens which are entirely
ripple free are completely tensioned frame-screens, which unfor-
tunately you cannot roll up after use to save space. Therefore, rol-
led screens are an acceptable compromise for most users. How-
ever, you have the possibility to optimize the surface. To do this,
first remove the side covers and the two fixing screws on the un-
derside of the weighting panel and pull off the panel to one side.
______________
connect a new remote control, please
follow these steps:
1. Hold the „Stop" button on the wall panel
for 5 seconds. You will hear a double beep.
2. Press any button on teh remote control
you wish to connect. Once the connection
was successful, you will hear a long beep.
Disconnect all connected remote controls
To disconnect all connected remote con-
trols from the wall panel, hold the „Stop"
button for at leat 10 seconds until you hear
a triple beep. All remote controls are now
disconnected from the wall panel.
25

Werbung

loading

Verwandte Produkte für eSmart EXPERT XTS