Dell Precision R5400 Installations Anleitung Seite 22

2 Fit the latch of the ramp assembly on the ramp assembly bracket, located on the opposite side of
the rack from where you attached the cable-management arm (see Figure 1-11).
3 To slide the cable-management arm into place:
Locate the ramp assembly wireform guide at the bend of the cable-management arm.
a
Lift and slide the ramp assembly wireform guide up the ramp, stopping at the ramp assembly
b
seating catch.
If you have selected the correct ramp assembly, the wireform guide will seat correctly in the catch
c
at the top of the ramp assembly each time the system is cycled in the rack. Figure 1-11 shows
the left ramp assembly installed with the cable-management arm attached on the right.
To disengage the cable-management arm ramp assembly, press the ramp assembly release button on
the ramp assembly latch and pull the ramp assembly off the bracket (see Figure 1-11).
Figure 1-11. Installing the Cable-Management Arm Ramp Assembly
1
1 ramp assembly bracket
4 ramp assembly seating catch
NOTE:
In Figure 1-11, the cable-management arm is attached on the right side of the rack and the left cable-
management arm ramp assembly is attached to the left side of the rack. Conversely, if you attach the cable-
management arm on the left side of the rack, attach the right cable-management arm ramp assembly to the right
side of the rack.
20
Rack Installation Guide
3
2
4
2 cable-management arm ramp
assembly latch
5 left cable-management arm
ramp assembly
5
6
3 ramp assembly release button
6 ramp assembly wireform
guide