Maintenance And Cleaning; Ordering Spare Parts - EINHELL QH 1800 Betriebsanleitung

Anleitung QH 1800_SPK1:Anleitung QHT 1500_
Maximum heat output = Display indicates "3", three
heating elements activated

7. Maintenance and cleaning

Maintenance and repair work may only be carried
out by an electrical servicing contractor or ISC
GmbH.
Check the mains lead at regular intervals for signs
of defects or damage. A damaged mains lead may
only be replaced by an electrician or ISC GmbH in
compliance with the relevant regulations.
Important: Disconnect the mains lead before
cleaning – danger of electric shock.
Use a damp cloth to clean the casing.
Never use combustible cleaning agents.
To remove dust on the reflector and heating
elements, use a brush with long soft bristles.
In cases of very stubborn dirt the appliance should
be cleaned by a professional.

8. Ordering spare parts

Please provide the following information on all orders
for spare parts:
Model/type of machine
Article number of the machine
ID number of the machine
Number of the required spare part
For our latest prices and information please go to:
www.isc-gmbh.info
25.06.2010 11:02 Uhr Seite 9
GB
9