21 Trend arrow indicators
1
1
Rising
3
Falling
The temperature and humidity trend indicator shows the
trends of changes in the forthcoming few minutes. Arrows
indicate a rising, steady or falling trend.
22 Connecting remote sensors
The weather station can display the readings from up to 3
wireless sensors* of the same type. Each wireless sensor
must be set to a separate channel. Proceed as follows to set
the channel.
1.
2.
3.
4.
5.
NOTICE! Each connected wireless sensor must be set to a
different channel. If only one wireless sensor is connected,
it should be set to channel 1.
*one wireless sensor included, more optionally available
2
Remove the battery compartment cover of the wireless
sensor.
Set the CH slider switch to the desired channel (1, 2 or
3).
Re-attach the battery compartment cover.
Press the [DOWN] button on the base station several
times to display the readings of the individual channels
one after the other or automatically alternate. The se-
lected channel is shown on the display.
Press the [DOWN] button for approx. 3 seconds to initi-
ate the search for a sensor.
3
2
Steady
17 / 40