4.
Press the [SET] button to confirm and switch to the next
setting.
5.
Sequence of settings: 12/24 > time zone > hours >
minutes > day/month display change > year > month >
day > language
6.
Finally, press the [SET] button to save the settings and
exit settings mode.
NOTICE! If no button has been pressed for 20 seconds, the
setting mode is automatically exited. The changes made up
to that point are saved.
12 Time zone setting
The time zone is set as part of the manual time setting. Fur-
ther information can also be found in the chapter "Manual
Time Adjustment".
1.
Press the SET button for approx. 3 seconds to enter the
time setting mode.
2.
Possibly press the SET button several times until the
display shows the setting for the time zone (the factory
setting is '00').
3.
Press UP or DOWN button to select the desired time de-
viation in hours (-12 to +12 hours).
4.
Finally, press SET button for approx. 3 seconds to con-
firm the set time deviation.
13 Alarm setting
NOTICE! The alarm setting cannot be made when the time
signal search is active (the corresponding icon is flashing).
Wait until the time signal search is completed to set the
alarm manually.
1.
Press the [SET] button to display the alarm time.
2.
Press the [ALARM] button for approx. 2 seconds to
enter the alarm time settings mode.
13 / 40