Care And Maintenance - Canon WP-DC35 Benutzerhandbuch

Fig. 1
Waterproof Seal
• Be careful not to apply too much grease.
Applying too much grease to the seal may
cause water leakage (about a droplet is
sufficient).
• Do not use paper or cloth to apply the grease to
the seal.
• A damaged or cracked waterproof seal may
cause leaks. Please contact your Canon
Customer Support Help Desk.
To ensure that the Waterproof Case remains
waterproof, it is recommended to replace the
seal once a year. Please contact your Canon
Customer Support Help Desk.

Care and Maintenance

• Wash the exterior of the Waterproof Case with
enough clean fresh water (tap water under
30 °C/ 86 °F, etc.) as soon as possible after
using it. It is particularly advisable to soak it in
fresh water for several hours after use in salt
water to remove salt deposits. Please check
that you have locked the catch securely to
prevent water from entering the case. Wipe
it dry with a soft cloth after washing. To avoid
scratching the Waterproof Case, do not wipe it
while any sand or grit remains on it. The metal
parts may rust or the buttons may become hard
to press if salt deposits remain. Wipe the
interior of the case with a soft, dry cloth. Do not
wash it with water.
7