Thrustmaster RACELINE PEDALS III Benutzerhandbuch Seite 27

The installation procedure may vary slightly, depending
on the racing wheel base being used. For more
information, please refer to the racing wheel base's
user manual.
1. Connect the triple-jack/RJ12 cable to the RJ12
connector on the racing wheel base, and to the
Raceline Pedals III pedal set.
The jack connector with the C marking (Clutch)
connects to the clutch pedal. The jack connector with
the B marking (Brake) connects to the brake pedal. The
jack connector with the G marking (Gas) connects to
the accelerator pedal.
2. Connect the base to a USB-A port on the game
console or PC.
3. Connect the power adapter to the base, and also plug
it into a wall outlet.
26