Herunterladen Inhalt Inhalt Diese Seite drucken

High Temperature Alarm; Child Lock Function - AEG S92500CNM0 Benutzerinformation

Weinkühlraum-/ gefrierschrankkombination
Vorschau ausblenden Andere Handbücher für S92500CNM0:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

High temperature alarm

An increase in the temperature in the freezer compartment (for example due to an earlier
power failure) is indicated by:
• flashing the alarm and freezer temperature indicators
• sounding of buzzer.
To reset the alarm:
1.
Press any button.
2.
The buzzer switches off.
3.
The freezer temperature indicator shows the highest temperature reached for a few
seconds. Then show again the set temperature.
4.
The alarm indicator continue to flash until the normal conditions are restored.
When the alarm has returned the alarm indicator goes off.
Door open alarm for the wine cellar and freezer compartments
An acoustic alarm will sound if the door is left open for a few minutes. The door open alarm
conditions are indicated by:
• flashing Alarm indicator
• acoustic buzzer
When normal conditions are restored (door closed), the alarm will stop.
During the alarm, the buzzer can be switched off by pressing any button.

Child Lock function

To lock the buttons from unintentional operation select the Child Lock function.
To switch on the function:
1.
Press the Mode button until the corresponding icon appears.
2.
The Child Lock indicator flashes.
3.
Press the OK button to confirm.
The Child Lock indicator is shown.
To switch off the function:
1.
Press the Mode button until the Child Lock indicator flashes.
2.
Press the OK button to confirm.
3.
The Child Lock indicator goes off.
Minute Minder function
The Minute Minder function is to be used to set an acoustic alarm at the preferred time,
useful for example when a recipe requires to cool down a mixture for a certain lenght of
time, or when a reminder is needed in order not to forget the bottles placed in the freezer
for fast cooling.
To switch on the function:
1.
Press the Mode button until the corresponding icon appears.
The Minute Minder indicator flashes.
The Timer shows the set value (30 minutes) for a few seconds.
2.
Press the Timer regulator button to change the Timer set value from 1 to 90 minutes.
9
Control panel

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis