Refco TRITECTOR Bedienungsanleitung Seite 11

6. Commissioning and Functions
6.1 Commissioning
Insert four batteries into the battery compartment on the bottom.
Observe the correct polarity of the batteries. If you will not be using
the TRITECTOR for a long period of time, remove the batteries from
the battery compartment.
6.2 Functions
Ambient concentration reset
When entering a contaminated area, it is important to have a
function which allows you to reset the leak detector. Upon initial
power on, the TRITECTOR automatically resets itself to ambient
concentration, to ignore the level of refrigerant present at the tip.
Only a level or concentration greater than the ambient
concentration will cause an alarm.
11 Instruction Manual