Herunterladen Diese Seite drucken

Busch+Müller IXON Core 2 Montage- Und Bedienungsanleitung Seite 15

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
4. Legal regulations
Before you operate your vehicle in public traffic, you are obliged to ensure that your vehicle complies with
national and local laws and regulations, and you, as a traffic participant must abide by the traffic regulations
that apply. These can be found in the Highway Code or national equivalent, and depending on the country, also
at other sources.
In Germany, the prescribed mounting height for headlights
your national Road Traffic Regulations or contact a local bicycle specialist retailer. Always make sure the
headlight is mounted and aligned in a way to ensure that oncoming traffic is not blinded.
!
Make sure the headlight is not covered under any circumstances. Also, take care that the headlight has been
mounted and aligned as prescribed.
5. Technical specification
Headlight dimensions: Height: 44 mm | Length: 117 mm | Width: 37 mm | Weight: 125 g | Brightness: 70/35/15 lux
Replaceable lithium battery, 3,000 mAh, quick-charging function via USB-C, power bank function with 1,500 mAh
28
1
is between 40 and 120 cm. For details, consult
6. Assembly
6.1. General assembly instructions
!
Make sure the headlight is not covered under any circumstances. Also, take care that the headlight
has been correctly mounted and aligned as prescribed.
WARNING
To avoid falls, accidents and severe injuries, always use the enclosed handlebar bracket
assembly
2
. If unsuitable or improperly positioned brackets are used, the headlight may loosen and
change position, slide down and, in the worst case, get caught in the wheel spokes.
NOTICE
Never mount brackets on conical components!
Make sure to tighten all screws just sufficiently to ensure the headlight
This is particularly important when travelling on uneven terrain.
1
cannot move inadvertently.
29

Werbung

loading

Diese Anleitung auch für:

181l181