Werbung
Verfügbare Sprachen
Verfügbare Sprachen
All manuals and user guides at all-guides.com
Item System functions
Options
11
AUTO CAPTURE QUANTITY
01, 02, 03
12
AUTO LEAVING MESSAGE
ENABLE
DISABLE
13
SCREENSAVER TIME
14
FIRMWARE VERSION
DVR (DIGITAL VIDEO RECORDER)
Touch
to open the Main Menu. Touch the DVR icon.
Touch
to open the DVR Settings.
Automatic DVR operation:
Set DVR to Enable in the System Settings. DVR can record video sequences from each
entrance panel and CCTV camera connected to the video entry phone system.
If motion detection is enabled, the system will automatically record a video sequence up to 7
minutes long in a cycle mode. The cycles of video sequence recording are 1 minute + 1
minute + 5 minutes. If a camera detects movement in its field of view, its video feed will be
recorded for 1 minute. Next, the video feed is again scanned for motion. If there is no motion
detected, the video feed recording stops. If there is motion detected, the video feed is
recorded for another 1 minute. Next, the video feed is again scanned for motion. If there is no
motion detected, the video feed recording stops. If there is motion detected, the video feed is
recorded for another 5 minutes, and then the recording stops.
DVR will not work if the microSD card in the display has less than 2 GB capacity.
Note
Automatically captures 1, 2 or 3 video feed
snapshots during a call from an entrance panel.
The visitor calling with an entrance panel can
leave a voice message after an Away-from-Home
Reply and tone.
Disables this mode.
30 s, 1-3 min, 5, 10, 20, 30, 40, 50, 60 min
Displays the version of the firmware installed on
the display.
14
Werbung
