Werbung
Verfügbare Sprachen
Verfügbare Sprachen
All manuals and user guides at all-guides.com
DISPLAY MICROPHONE MONITORING
With the display on standby, touch and hold
another display in the voice entry phone system. If you have more than 2 displays in the
video entry phone system, choose the display you wish to listen to by touching
and confirm by touching the icon.
Note:
a)
The user of the display that is listening will hear everything that the microphone of the
display being listened to captures. The display being listened to will not output the
sounds captured by the microphone of the display which is listening.
b)
If you have more than 2 displays in the video entry phone system, verify that the remote
listening mode is enabled in the display to which you want to listen. Go to System
Settings and verify that Can Be Monitored is set to Enable.
MANUAL AUDIO RECORDING
Touch
on the main screen; next, touch
again to stop recording. The recorded files are listed in the Messages menu
SNAPSHOT CAPTURE
Manual capturing: Touch
when displaying a video feed from an entrance panel or
monitoring a video feed. A snapshot of the video frame will be captured. The display will
show the message IMAGE CAPTURED.
Automatic capture: To have the display automatically capture snapshots, set the AUTO
CAPTURE QUANTITY in the System Settings to 1, 2 or 3. The display system will then
capture and save the set number of video snapshots to the microSD card when a call is made
with an entrance panel.
SYSTEM SETTINGS
With the display on standby, touch
.
to start listening through the microphone of
to record an audio sequence. Touch
and open the System Settings menu. Next, touch
12
or
.
Werbung
