Troubleshooting; Maintenance Items; Accessories; Transportation And Handling - Honda HRE410 Originalbetriebsanleitung

Do not use harsh products
for cleaning the chassis.
Should you have any doubts
or require clarification, do not
hesitate to contact your Sales outlet.

7. TROUBLESHOOTING

PHENOMENON
The power cable plug
has fallen out of the
power socket
The power cable is cut
or broken
The Motor stops
during usage
Motor safety device
works in below cases:
Or
– Bade stops when
making contact
The Motor
with obstacles
does not engage
– The motor
during correct
has overheated
operation
The Motor switch
is broken
The Motor is broken
The grass cannot
The cutting height is
be mown or there
too low
is not enough
Too much grass is
power to mow
being cut at once
the grass
Or
The blade has worn,
Grass quality is broken or not been
poor after cutting installed correctly
Or
Grass cuttings have
accumulated inside
The Grass Bag is
the blade housing
not filling enough
or in the grass bag
The blade is broken
The blade is bent
Too much
vibration
The Blade has not
been
assembled correctly
EN 6
CAUSE ACTION
Connect the electrical
plug
and socket correctly
Repair or replace
the power cable
Wait for the safety
device to recover
(Aproximatly 1 hour)
– Remove any
obstacles around the
blade with the power
cable
unplugged
– Wait for the motor
to cool down
Contact your
Honda dealer
Adjust the cutting
height
Or
Reduce the cutting
width
Replace Blade
and or Grass bag
Remove grass
cuttings and clean the
housing, shoot and bag
Replace with a new
Blade
Reassemble the blade
correctly

8. MAINTENANCE ITEMS

CHECK ITEM
Check the blade fixing and make sure the blade
has no signs of abnormal wear, deformation or damage
Check the plug socket, plug and power cable
have no signs of damage
Check the grass bag is clean
and not damaged
Check the motor cooling ducts are clean
and not blocked with grass or debris
Check motor rotation conditions by abnormal sound
or not
Check and clean over-whole machine outside

9. ACCESSORIES

MODELS
Grass bag, frame
Grass bag, fabric
Blade, Rotary
10. TRANSPORTATION
AND HANDLING
Whenever the machine is to be handled, raised, transported or tilted
you must:
– wear strong working gloves;
– grasp the machine at the points that offer a safe grip, taking ac-
count of the weight and its distribution.
– use an appropriate number of people for the weight of the ma-
chine and the characteristics of the vehicle or the place where it
has to be placed or collected.
During transport, fasten the machine securely with ropes or chains.

11. ENVIRONMENTAL PROTECTION

Environmental protection should be a priority of considerable im-
portance when using the machine, for the benefit of both social co-
existence and the environment in which we live.
– Try not to cause any disturbance to the surrounding area.
– Scrupulously comply with local regulations and provisions for the
disposal of waste materials after sawing.
– Scrupulously comply with local regulations and provisions for the
disposal of oils, petrol, damaged parts or any elements which
have a strong impact on the environment; this waste must not be
disposed of as normal waste, it must be separated and taken to
specified waste disposal centres where the material will be recy-
cled.
– At the time of decommissioning, do not pollute the environment
with the machine, hand it over to a disposal centre, in accordance
with the local laws in force.
CHECK
BEFORE
USAGE *
*
*
*
*
*
HRE410
CG81006430H0
CG81002140H1
CG81004396H0