Technaxx TE16 Gebrauchsanleitung Seite 13

Normal use
The power inverter is intended to convert 12V direct current voltage to
alternating current voltage 230V / 50Hz [modified sine wave] and/or
direct current voltage of 5V / max. 2.1A (2.0 USB).
IMPORTANT: the TE16 provides a modified sine wave. Please check your
devices for compatibility.
The power inverter is only intended for permanent installation.
This power inverter is not intended for use by children or persons with
limited mental capacity or lacking experience and/or lacking expertise.
Children should be supervised to ensure they do not play with the power
inverter.
The power inverter is not intended for commercial use.
Any other use or modification of the device is considered improper and
involves significant risks. The manufacturer assumes no liability for damages
due to improper use.
Intended sites
The power inverter is intended for installation in
Automobiles and lorries
Caravans
Boats
with 12V batteries.
Do not place the power inverter:
near heat sources (radiators, direct sunlight), flammable materials, battery
compartment or starter battery,
moist locations or locations exposed to dripping or splashing water,
in environments with explosion hazards