THOMSON RT350DAB Bedienungsanleitung Seite 21

Restore factory settings
In the DAB system settings, press < or > to access <Factory Reset>. If you want to perform
a reset, press < or > to display "YES", then OK to confirm. Your radio will be completely
reset. All the presets and station lists will be erased. The display will return to normal.
Displaying the device software version
In the DAB system settings, press < or > to select <SW version> (software version), then
press OK to view the software version.
FM radio
Extend the telescopic aerial fully and carefully to find its optimum position.
Automatic search
Use the Mode Selector on the rear panel to select FM mode.
1. Press and hold the
automatically when it finds a station with sufficient signal strength.
2. Once the automatic search is complete, the first three FM stations will be automatically
stored on buttons P1, P2 and P3. You can listen to other stations by turning the
frequency selection dial.
Menu
In FM mode, press
search settings, and press "Enter" to choose the sensitivity setting:
Stations with a strong signal only: ~19 dB
button. The device will scan the frequencies and stop
to access the FM settings menu. Press < / > to choose the station
- EN 21 -