Silvercrest SZP 40 C2 Bedienungsanleitung Seite 26

Disposal of the packaging
The packaging protects the appliance from transport damage . The packaging
materials are selected from the point of view of their environmental friendliness
and disposal technology and are therefore recyclable .
Returning the packaging to the material cycle conserves raw materials and
reduces the amount of waste that is generated . Dispose of packaging materials
that are no longer needed in accordance with applicable local regulations .
Dispose of the packaging in an environmentally friendly manner .
Note the labelling on the packaging and separate the packaging material
components for disposal if necessary . The packaging material is labelled with
abbreviations (a) and numbers (b) with the following meanings:
1–7: Plastics,
20–22: Paper and cardboard,
80–98: Composites .
NOTE
► If possible, keep the original packaging during the warranty period so
that the appliance can be properly packed for returning in the event of a
warranty claim .
Handling and use
This section provides important information about proper handling and operation
of the appliance .
Assembling the appliance
♦
Before using the appliance for the first time, clean all component parts
thoroughly as described in the section "Cleaning and care" .
♦
Set up the appliance in accordance with the safety instructions .
WARNING! RISK OF INJURY!
► Ensure that the mains cable plug is disconnected before assembling the
appliance .
♦
Pull the mains cable out of the cable compartment
♦
Place the motor unit
♦
Place the juice container
is pointing forwards .
♦
Put the pressing cone with sieve
♦
Insert the plug into a mains power socket .
The appliance is now ready for use .
SZP 40 C2
on a dry, stable and level surface .
on the motor unit
onto the drive shaft
.
so that the juice outlet
.
GB │ IE │ 23 ■