Berner BIO Bedienungsanleitung Seite 6

2.3 FILLING THE PARTS WASHER
1. Check the drain tube is in high position and locked in place.
2. Remove drain cap to allow liquid levelling.
3. Empty the cans into the tank to reach 100L.
CAUTION
You may have to make a complete turn to find the
notch. Do not force, it just goes in smoothly.
4. Screw back the drain cap.
5. Insert a micro-organism tablet into the
rectangular opening provided for the purpose.
6. Note the date on the servicing datasheet.
3 CONTROL BOX
MESSAGE
display
POWER ON
Light (white)
ECO
Light
BOOST
(yellow)
Light
(green)
100 litres
80 litres
60 litres
HEATING
Light (green)
LOW LEVEL
Light (red)
6
PUMP
Button
BOOST or
Button
Reset safety
thermostat
ECO or
Button
(energy savings)
HEATING
Button
(EN)