Berner BIO Bedienungsanleitung Seite 5

(EN)
5. Make sure the electric kit is fitted in the adapted slide / compartment.
6. Deposit the pump on the bottom of the tank, in the appropriate place (between the 4
cones) and connect its electric cable to the kit: join the green-ring connector and turn it
until it gets inside the kit connector.
CAUTION
You may have to make a complete turn to find the notch.
Do not force, it just goes in smoothly.
7. Once connected properly, screw the green ring to fix the connector.
8. Connect the pump to the filter with the quick connector.
9. Place the electric kit hose in the adapted groove.
10. Position the sink to its standard position. Beforehand,
re-clip the black hose under the sink and replace the brush
hose in its indentation.
11. Place back the SS basket filter, the soak tray bung (indexes should be positioned with
ribs to the top) and the soak tank cover (waves engraved).
5