Berner BIO Bedienungsanleitung Seite 17

(EN)
APPENDIX 3: DISMANTLING THE PUMP
1 Lift up the sink, unclip
the black hose under the
semi-rigid hose.
2 Remove the brush hose
from its indentation and
remove the sink
3 Disconnect the pump hose
and electric cable.
4 Disconnect the pump
electric cable.
5 Take off the pump
6 Slide up the electric kit to
take it off.
REMOVING REFITTING (see § 2.2)
7 Remove grid 2 on the pump
(cut the black plastic collar if
necessary)
8 Remove parts 3 Remove
the assembly comprising
parts 4 to 7 (photo)
CAUTION:
The axel is fragile
9 Remove the rotor assem-
bly parts by pulling on the
blade Remove the white axel.
For re-fitting, proceed in
reverse order
17