Regular Servicing; Electrical Diagram - Berner Bio Bedienungsanleitung

LAN-
GUAGE
EXIT
8 MAINTENANCE

8.1 REGULAR SERVICING

- Clean the filters whenever they are clogged so as to make sure that the product flows into the tank correctly. Filter is
located at the right of the parts washer.
- Add micro-organism tablets as per the schedule on the servicing datasheet supplied with the machine.
CAUTION
Before entering the parameter-setting mode, HEATING must be switched off (HEATING light OFF).

8.2 ELECTRICAL DIAGRAM

Electrical connections inside the control box
Changing languages:
The different languages are displayed by pressing
the or buttons.
The "language" parameter is safeguarded by
pressing the °C - ON/OFF button. The "ECO TIME"
message will be displayed
Press the °C - ON/OFF button for 2s to exit the
parameter-setting mode.
- If no buttons are pressed the unit will return to
normal mode after 15 s.
12
(EN)
V 4.5 37°C
ITALIAN
V 4.5 MODIF 37°C
ECO TIME 14H
V 4.5 37°C
ADD PRODUCT