Vulkan LOKPREP LDS-SET-H Betriebsanleitung Seite 27

9.3.23
Press the button of the dispensing valve
handle (15) or the PURGE key at the
dispensing valve controller (1) until the
LOKPREP has reached the dispensing valve
(16) and exits the dispensing valve (16)
without entrained air bubbles.
Make sure to collect exiting LOKPREP by
appropriate means like a cloth or paper
towel.
9.3.24
Attach a dispensing tip (19) to the dispensing
valve (16).
9.3.25
Press the button of the dispensing valve
handle (15) a few times until LOKPREP exits
the dispensing tip (19). Again, make sure
to collect exiting LOKPREP by appropriate
means like a cloth or paper towel.
LDS-SET-UM-U1-V1.0
16
16
19
19
Operating Instructions / LOKPREP® Dispensing System LDS-SET-H / LDS-SET-V
EN
DE
27