Vulkan LOKPREP LDS-SET-H Betriebsanleitung Seite 25

9.3.15
Fill the entire amount of Isopropanol
intermittently into a suitable container
by repeatedly pressing the button of the
dispensing valve handle (15). (The collected
Isopropanol can be used for the first rinse
during the next cleaning.)
9.3.16
Repeat steps 9.3.9 to 9.3.15.
Repeating these steps once should
!
normally be sufficient. In case of stubborn
soiling, repeat the process until there is no
more residual LOKPREP in the Isopropanol.
9.3.17
Press and hold the button of the dispensing
valve handle (15) for min. 120 s to allow air
to flow through the hose. This ensures that
the remaining Isopropanol evaporates.
9.3.18
Close the 3/2 way valve (9).
LDS-SET-UM-U1-V1.0 Operating Instructions / LOKPREP® Dispensing System LDS-SET-H / LDS-SET-V
15
9
25
EN
DE