Vulkan LOKPREP LDS-SET-H Betriebsanleitung Seite 23

9.3.7
Press PROG until you get to the "Manual"
mode.
9.3.8
Fill the remaining LOKPREP into a suitable
container by pressing and holding the
button of the dispensing valve handle (15).
Towards the end stop pushing the button
of the dispensing valve handle (15) for
approx. 5 seconds until more LOKPREP has
gathered. Then shortly press the button
of the dispensing valve handle (15) again.
Repeat this procedure approx. 10 times to
remove as much of the LOKPREP residues
as possible.
! Do not reuse the LOKPREP, but dispose
of it according to the instructions in the
safety data sheet.
9.3.9
Close the 3/2 way valve (9).
9.3.10
Remove the cartridge sleeve cap (10) from
the cartridge sleeve (12).
LDS-SET-UM-U1-V1.0 Operating Instructions / LOKPREP® Dispensing System LDS-SET-H / LDS-SET-V
9
10 10
12 12
23
EN
DE