Adjust The Lds-Dvh-H (Handle For Horizontal Lokprep Application) - Vulkan Lokprep Lds-Set-H Betriebsanleitung

5.6.2
Assemble the clamp for cartridge sleeve
(13) to the cartridge sleeve stand using a
screwdriver Torx 20.
EN
6.0

Adjust the LDS-DVH-H (handle for horizontal LOKPREP application)

DE
6.1
Loosen the screw inside the dispensing
valve handle (15) using a long bit Torx 25.
! Be careful not to damage any of the
hoses inside the dispensing valve handle
(15).
6.2
Choose your preferred position for the
handle.
6.3
Tighten the screw inside the dispensing
valve handle (15) using a long bit Torx 25.
! Make sure that none of the hoses
get under the head of the screw and are
crushed or damaged as a result.
14 Operating Instructions / LOKPREP® Dispensing System LDS-SET-H / LDS-SET-V
13
15
15
LDS-SET-UM-U1-V1.0