Teaching In/Deleting Of Other Transmitters/Channels; Programming Of Further Transmitters/Channels; Deleting Of Transmitters/Channels; Set Intermediate Position - Selve Se Plus-R Einstellanleitung

All manuals and user guides at all-guides.com

Teaching in/deleting of other transmitters/channels

5. Teaching in/deleting of other transmitters/channels
5.1. Programming further transmitters/channels
Press the PROG button of a programmed transmitter/channel for 3 seconds (wait
for confirmation run from the drive). The receiver is now in programme mode for
1 minute. Press (1 sec.) the PROG button of the new transmitter/channel. The new
transmitter/channel has now been programmed.
programmed transmitter/channel
3 sec.

5.2. Deleting of transmitters/channels

Press the PROG button of a programmed transmitter/channel for 3 seconds (wait
for confirmation run from the drive). The receiver is now in programme mode for
1 minute. Press (1 sec.) the PROG button of the transmitter/channel you wish to delete.
The transmitter/channel has now been deleted.
programmed transmitter/channel
3 sec.
➡

6. Set intermediate position

The intermediate position is an arbitrary position of the roller shutter between the upper
and lower end.
Set intermediate position 1
➧
Press and
hold down
new transmitter/channel
➡
transmitter/channel to be deleted
Run to position
1 sec.
✓
1 sec.
✓
>3 sec.
➧
35
Release STOP to save the
position
GB
✓