EuroLite LED KLS-120 FX Bedienungsanleitung Seite 30

Remote control IR-7
The device must be activated for remote control. For this, set menu item InFr to on. When actuating
button, always direct the remote control towards the sensor. There must be no obstacles
control and the sensor.
IRC REMOTE
gee
eurolite•
o
Notes:
• The remote control is supplied with a battery inserted
contacts prevents the battery from being discharged
foil from the battery support on the rear side of the remote control. Otherwise,
control is not possible
• If the range of the remote control decreases, replace the battery. For this purpose,
on the rear side of the remote control press the small bar with the groove to the
right and at the same time remove the battery support. For operation,
button cell type CR 2025 is required.
positive pole of the button cell shows upwards in the support
• Remove the battery from the remote control as a precaution
time
English
Button Function
BLACKOUT LEDs
Automatic mode; program selection with (+)/(—)
AUTO
SOUND
Sound control; program selection with (+)/(—)
Strobe effect of the white (Bar) LEDs for automatic mode
STROBE
and sound control; flash rate setting with (+)/(—)
Running speed in automatic mode and sound control;
SPEED
setting with (+)/(—)
SENSITIVITY Microphone sensitivity; setting with (+)/(—)
DMX DMX mode
MANUAL Color mode; select colors with R/G/B/W and (+)/(—)
Total brightness;
1-9
An insulating foil between the battery and the battery
during storage. Prior to the first operation remove the
When inserting,
30/36
off
1 = dark, 9 = bright
one 3 V
pay attention that the
if the device is not used for a longer period of
a
between remote
operation of the remote
00128818, Version 1.1