Whirlpool KBT 6424 DO (BI)(T) Bedienungsanleitung Seite 18

Programmed time display
If one or more plates have been programmed, the display
shows the time remaining for the plate which is closest to
the end of the programmed time, indicating its position by
means of the corresponding indicator light, which will be
on. The indicator lights that correspond to the other pro-
grammed plates will flash.
To show the time remaining for the other programmed
plates, press repeatedly; the times of all the pro-
grammed plates will be shown in sequence, in an anti-
clockwise direction, beginning from the front left one (only
the corresponding indicator light will be on and the dis-
play flashes)
Modification of programmed times
Proceed as per the paragraph "Programmed time display"
until the time of the plate you intend to modify is shown.
Press the keys "+" and "-"
Confirm by pressing
ing any keys.
Cancelling a programme
Display the time of the plate concerned (as in the para-
graph "Programmed time display") and press the keys "+"
and "-" simultaneously; the programme is re-
set and you exit the programming mode.
19
to set the new time.
or wait 10 seconds without press-