imilab EC5 Bedienungsanleitung Seite 6

Note:
1.The MicroSD card needs to be purchased separately. The camera can be
used without a MicroSD card.
2.When inserting or removing the MicroSD card, please disconnect the
camera from the power supply. Use a MicroSD card from a reputable
manufacturer (up to 256GB). The recommended read and write speed of
the MicroSD card is at least U1/Class 10.
3.After installing the MicroSD card or resetting the device, close the
waterproof cover tightly before using it.
FAQ
Scan the QR code for Frequently Asked Questions.
Installing the Device
The device can be mounted on walls, ceilings, or poles.
• Wall mounting
1. Attach the wall mounting positioning sticker on the desired installation
location on a wall. Drill two holes at the positions indicated on the sticker.
The drilling diameter should be around 6.0 mm with a depth of around 30
mm.
2. Insert two plastic expansion nuts
into the wall. Put the base plate on
the wall. Secure the base plate by
inserting the screws into the
expansion nuts.
Note: The product must be hung
horizontally after installation (see
below).
4