Ventilation Requirements; Installing The Appliance - ZANKER ZKK8021 Benutzerinformation

Ventilation requirements

The airflow behind the
appliance must be suffi-
cient.
x
If necessary cut the adhe-
sive sealing strip and then
apply it to the appliance
as shown in figure.
min.
50 mm
200 cm 2
x
Install the appliance in the
niche.
Push the appliance in the
direction of the arrows (1)
until the upper gap cover
stops against the kitchen
furniture.
Push the appliance in the
direction of the arrows (2)
against the cupboard on
the opposite side of the
hinge.

Installing the appliance

Caution! Make sure that the mains cable can
move freely.
Do the following steps:
min.
2
200 cm
2
4mm
1
44mm
Adjust the appliance in the
niche.
Make sure that the dis-
tance between the appli-
ance and the cupboard
front-edge is 44 mm.
The lower hinge cover (in
the accessories bag)
makes sure that the dis-
tance between the appli-
ance and the kitchen furni-
ture is correct.
Make sure that the clear-
ance between the appli-
ance and the cupboard is
4 mm.
Open the door. Put the
lower hinge cover in posi-
tion.
I
I
Attach the appliance to
the niche with 4 screws.
19