Service And Maintenance; Machine; Cutter; Storage - Mafell Rf 34-18 Originalbetriebsanleitung

Danger
Before putting the machine down,
switch off the engine and wait until
the working tool has come to a
standstill.
7

Service and maintenance

Danger
Unplug the rechargeable battery for
all service work.
MAFELL machines are designed to be low in
maintenance.
The ball bearings used are greased for life. When the
machine has been in operation for a longer period of
time, we recommend to hand the machine in at an
authorised MAFELL customer service shop for
inspection.
Only use our special grease, order No. 049040 (1 kg
tin) for all greasing points.

7.1 Machine

The machine must be regularly cleaned off deposited
dust. The ventilation openings on the motor should be
cleaned with a vacuum cleaner.

7.2 Cutter

Danger
Unplug the rechargeable battery for
all service work.
Danger
Risk of injury from the cutter!
The cutters used on the machine must be freed from
resin regularly as clean tools improve the cutting
quality.
For cleaning, only acid-free but not highly alkaline
cleaning agents may be used.
Deresinification is carried out by soaking the cutters for
24 hours in paraffin or commercially available resin
remover.

7.3 Storage

If the machine is out of service for a lengthy period of
time, it should be thoroughly cleaned (see chapter 7.1).
Spray bright metal parts with a rust inhibitor.
Only store the machine in dry rooms and protected
from the effects of the weather.

7.4 Transport

The included Li-ion rechargeable batteries are subject
to the requirements of dangerous goods legislation.
The rechargeable batteries can be transported by the
user on the road without any further requirements.
For the dispatch by third parties (e.g.: air transport or
forwarding agent), special requirements for packaging
and labelling must be observed. In this case, a
dangerous goods expert must be consulted when
preparing the package.
Only dispatch rechargeable batteries if their housing is
undamaged. Tape open contacts and pack the
rechargeable battery so that it does not move in the
packaging.
Please also observe any further national regulations.

7.5 Disposal of rechargeable batteries/batteries

Electrical tools, rechargeable
batteries, accessories and
packaging should be recycled in an
environmentally friendly manner.
Do not dispose of electrical tools together with
domestic waste!
For EU countries only:
According to the European
Directive 2002/96/EC, power tools
that are no longer serviceable, and
according to the European
Directive 2006/66/EC, defective or
used rechargeable
batteries/batteries must be
collected separately and recycled
in an environmentally sound
manner.
-27-