Scope Of Supply; Safety Devices; Intended Use; Residual Risks - Mafell Rf 34-18 Originalbetriebsanleitung

2.6 Scope of supply

Gutter support inlet milling machine RF 34-18 complete with:
1 milling head
1 operating tool
1 carrying case
1 operating manual
1 folder "Safety instructions"

2.7 Safety devices

Danger
These devices are required for the
machine's safe operation and may
not be removed or rendered
inoperative.
Before operating the machine,
check the safety devices for
function and possible damage. Do
not use the machine with missing
or ineffective safety devices.
The machine is equipped with the following safety
devices:
- Base plate
- Handles
- Index mechanisms
- Electronic system with restart protection

2.8 Intended use

The gutter support inlet milling machine RF 34-18 is
suitable for milling fastening grooves for gutter
supports in wood and wood-based materials.
For this, the base plate of the machine must rest on the
flat areas of the workpiece. Hand-guided processing is
not permitted. (Risk of backlash)
Only use the tool included in the delivery.
Do not remove any safety devices to enable work other
than that described above.
Any other use than described above is not permissible.
The manufacturer cannot be held liable for any
damage arising from such other use.
So as to use the machine as intended, comply with the
operating, maintenance and repair instructions
specified by Mafell.
Only use original Mafell / CAS rechargeable batteries
and accessories.

2.9 Residual risks

Danger
Even if used in accordance with its
intended purpose and despite
conforming with the safety
instructions, residual risks caused
by the intended use that can lead
to health consequences will always
remain.
- Machine backlash.
- Touching the milling cutter below the base plate.
- Putting down the machine while the tool is coasting
to a standstill and a resulting unexpected movement
of the machine or of an entrained object.
- Breakage and hurling out of the tool or parts of the
tool.
- Breakage and ejection of parts of the workpiece and
metal parts contained therein (e.g. nails or screws).
- Hearing can be impaired when working for long
periods without ear protectors.
- Emission of harmful wood dusts during longer
operation without extraction.
-21-